Brother HL-1430 - For USB Interface Cable Users; For Mac os 8.6 to 9.2 Users; Installing the Driver & Connecting the Printer to Your Macintosh

16
Installing the Driver
Installing the Driver & Connecting the Printer to your Macintosh
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Follow the on-screen instructions, and
restart your Macintosh.
3 Make sure the printer power switch is on.
4 Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5 Open the Chooser from the Apple menu.
6 Click the Brother Laser and select
HL-14XX series.
Close the Chooser.
The setup is now complete.
For USB Interface Cable Users
For Mac
®
OS 8.6 to 9.2 Users
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Step 2