Getting Started
6
1
1
Carton Components
Carton components may vary from one country to another.
Save all packing materials and the printer carton in case for any reason you must ship your printer.
1 Face-down Output Tray Support Flap (Support Flap)
2 Control panel
3 Front Cover
4 Manual feed slot
5 Paper Tray
6 Power Switch
7 Face-down Output Tray (Top Output Tray)
The interface cable is not a standard accessory. Buy the appropriate cable for the interface you are going to use.
USB cable
• Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).
• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer
driver installation process.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB
port on a keyboard or non-powered USB hub.
• USB is not supported under Windows
®
95 or Windows NT
®
4.0.
5
2
3
4
1
6
7
CD-ROM
(including User’s Guide)
Quick Setup Guide
Drum unit assembly
AC power cord
To Next Page
Loading...
