Brother HL-2070N - For USB Interface Cable Users; For USB Interface Cable Users (Windows 98;Me;2000;Xp Users)

12
Installing the Driver
Installing the driver and connecting the printer to your PC
1 Make sure the USB interface cable is NOT
connected to the printer, and then begin
installing the driver. If you have already
connected the cable, remove it.
2 Click Install Printer Driver on the Menu
screen.
3 Select the USB cable.
4 Read the license agreement carefully.
Then follow the on-screen instructions.
5 When this screen appears, make sure the
printer power switch is on.
Connect the USB interface cable to your
PC, and then connect it to the printer.
Click the Next button.
For USB Interface Cable Users (Windows
®
98/Me/2000/XP Users)
If the Found New Hardware Wizard
appears on your PC, click the Cancel
button.
C
A
N
C
E
L
Step 2