41
7
7
Copy settings 7
When you want to quickly change the copy
settings temporarily for the next copy, use the
temporary COPY keys. You can use different
combinations.
MFC-7360N
7
MFC-7460DN and MFC-7860DW 7
The machine returns to its default settings
one minute after copying, unless you have
set the Mode Timer to 30 seconds or less.
(See Mode Timer on page 4.)
To change a setting, press the temporary
COPY keys. You can use Options,
Enlarge/Reduce or Duplex
1
.
When you are finished choosing settings,
press Start.
1
For MFC-7460DN and MFC-7860DW
Stop copying 7
To stop copying, press Stop/Exit.
Enlarging or reducing the
image copied 7
You can choose the following enlargement or
reduction ratios:
* The factory setting is shown in Bold with an
asterisk.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Making copies 7
Press
100%*
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83%
78%
70% A4iA5
50%
Custom(25-400%)
Auto
200%
141% A5iA4
104% EXEiLTR
To Next Page
Loading...
