Brother HL-2130 - 10 How to Scan to a Computer; Scanning a Document; Scanning Using the Scan Key

49
10
10
Scanning a document 10
There are several ways to scan documents.
You can use the (SCAN) key on the
machine or the scanner drivers on your
computer.
a To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User’s
Guide.)
b Load your document. (See How to load
documents on page 22.)
 Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c Do one of the following:
 To scan using the (SCAN)
key, go to Scanning using the scan
key on page 49.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 50.
Scanning using the
scan key 10
For more information, see Using the Scan
key in the Software User’s Guide.
a Press the (SCAN) key.
b Choose the scan mode you want.
Scan to:
 File
 E-mail
 OCR
1
 Image
 FTP
2
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 5 for
further instructions.
2
For MFC-7460DN and MFC-7860DW
c Choose the computer you want to send
the data to.
d Press Start to begin scanning.
How to scan to a computer 10