Brother HL-2140 - Print Fonts (HL-2150 N; HL-2170 W Only)

Control Panel
58
4
Print Fonts (HL-2150N / HL-2170W only) 4
You can print a list of the internal fonts using the control panel button or printer driver.
Using the Go button 4
a Turn off the printer.
b Make sure that the front cover is closed and the power cord is plugged in.
c Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the
Toner, Drum and Error LEDs light up. Release the Go button. Make sure that the Toner, Drum and
Paper LEDs are off.
d Press the Go button twice. The printer will print a list of the internal fonts.
Using the printer driver 4
If you are using the Brother’s Windows
®
printer driver, you can print a list of the internal fonts by clicking the
Print Fonts button in the Support tab.