Brother HL-2250DN - How to Read the Card Commands Specification; Commands; Available Devices; Description

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 4
2. HOW TO READ THE CARD COMMANDS SPECIFICATION
Each command is described in the following four sections of this manual.
2.1 Commands
Command data sequences and syntax.
ESC or CR stands for 0x1b or 0x0d as follows;
ESC ----0x1b
CR ---- 0x0d
2.2 Available Devices
The supported memory card devices which can be used for each command are represented in this manual using
the abbreviations as follows.
Abbreviation Device Type
F Flash memory card (HL-1660e/2060/2400C/2400Ce/3400CN/
2600CN/3450CN)
A ATA flash memory card
(HL-1660e/2060/2400C/2400Ce/3400CN/2460/3260N/7050/2600CN/
3450CN/6050/6050D/6050DN/8050N/2700CN)
H Internal IDE HDD (HL-2400C/2400Ce/3400CN/2460/3260N/7050/
2600CN/3450CN)
I Internal flash memory (HL-1650/1670N/1270N/1470N/1850/1870N/
5070N/5170DN/6050/6050D/6050DN/5270DN/5280DW/5380DN/61
80DW/5470DW/5450DN/5440D/S7000DN)
2.3 Description
The detailed description about each command with command structure and syntax.
2.4 Error
Possible errors that may occur during cards operations.