9
1 Pull the paper tray completely out of the
printer.
2 While pressing the paper guide release lever,
slide the adjusters to fit the paper size.
Check that the guides are firmly in the slots.
3 Fan the stack of paper well to avoid paper
jams and misfeeds.
4 Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5 Put the paper tray firmly back in the printer.
3 Load Paper in the Paper Tray
For Legal size paper, press the
universal guide release button and pull
out the back of the paper tray.
Paper guide release
lever
Universal guide release
button
Up to here.
Go to the next page
Setting Up
Your Printer
Windows
®
USB
Windows
®
Parallel
Macintosh
®
USB
Installing the Driver
To Next Page
Loading...
