16
Installing the Driver
Installing the driver & connecting the printer to your Macintosh
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Follow the on-screen instructions, and
restart your Macintosh.
3 Make sure the printer power switch is on.
4 Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5 From the Apple menu, open the Chooser.
6 Click the Brother Laser and select the
appropriate printer.
Close the Chooser.
The setup is now complete.
For USB Interface Cable Users
For Mac OS
®
8.6 to 9.2 Users (HL-5130/5140 Users)
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Step 2
To Next Page
Loading...
