Brother HL-5130 - Printing on plain paper from the manual feed tray (For HL-5130 and HL-5140)

17
Connecting the printer to your Macintosh & installing the driver
1 Make sure the printer power switch is on.
2 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
3 Click the Install button, and follow the
on-screen instructions.
4 Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5 Open the Macintosh HD icon.
6 For Mac OS
®
8.6 to 9.04 Users:
Open the Apple Extras folder.
Open the Apple LaserWriter Software
folder.
For Mac OS
®
9.1 to 9.2 Users:
Open the Applications (Mac OS 9) folder.
Open the Utilities folder.
* The screens are based on Mac OS
®
9.04.
7 Double-click the Desktop Printer Utility
icon.
For USB Interface Cable Users
For Mac OS
®
8.6 to 9.2 Users (HL-5150D Users)
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Continue to
the next page
Setting Up
Your Printer
Macintosh
®
USB
Installing the Driver