APPENDIX (FOR EUROPE AND OTHER COUNTRIES) B - 2
Important information: Regulations
Radio interference (220 to 240 volt model only)
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use the following interface cables.
1. A shielded parallel interface cable with twisted-pair conductors and that it is marked "IEEE 1284
compliant".
2. A USB cable.
The cable must not be more than 2 meters long.
International ENERGY STAR
®
Compliance Statement
The purpose of the International ENERGY STAR
®
Program is to promote the development and
popularization of energy-efficient office equipment.
As an E
NERGY STAR
®
Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY
S
TAR
®
guidelines for energy efficiency.
To Next Page
Loading...
