ABOUT THIS PRINTER 1 - 12
Printing on plain paper from the manual feed tray (For HL-5130 and HL-5140)
1
Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.
Media Type: Plain Paper
Paper Source: Manual
PCL driver
2
Send the print data to the printer.
The printer automatically turns on the Manual Feed mode when you put paper in the manual feed
tray.
A NO PAPER message is shown in the Status Monitor and indicated by the control panel LEDs until
you put a sheet of paper in the manual feed tray.
Figure 1-10
Toner
Drum
Paper
Status
To Next Page
Loading...
