DRIVER AND SOFTWARE 2 - 10
Accessories tab
When you install the optional lower tray unit, you can add it and select its settings in the Accessories
tab as follows.
1
You can manually add and remove the options that are installed on the printer. Tray settings will
match the installed options.
2
Paper Source Setting
This feature recognizes the paper size in each paper tray.
3
Auto detection of printer options (For HL-5140, HL-5150D and HL-5170DN)
The Auto Detect function finds the currently installed devices and shows the available settings in
the printer driver. When you click the Auto Detect button, options that are installed on the printer
will be listed. You can manually add or remove options.
Auto Detect function may not be available under certain printer conditions.
1
2
3
To Next Page
Loading...
