Brother HL-5250DN series Network User's Guide

Troubleshooting
8 - 6
8
(5) (For Mac OS
®
X 10.2.4 to 10.3)
Make the following selection.
(6) Make sure that your print server appears. If it is visible, then the connection is good. Otherwise, go
to Step 4.
4 If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory
settings and try from the initial setup again. For information how to reset to the default factory settings,
see Restoring the network settings to factory default on page 7-7
Error during printing
If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with
high resolution), the printer is unable to accept your print job until the ongoing printing is finished. If the waiting
time of your print job exceeds a certain limit, a time out situation occurs, which causes the error message. In
such situations, execute the print job again after the other jobs are completed.

Brother HL-5250DN series Specifications

General

Interface	Ethernet 10/100 Base-TX
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Ports Qty	1
Type	Print server
Product Type	Print server
Network Protocols	TCP/IP
Features	SNMP support
Compliant Standards	IEEE 802.3
Compatible Printers	Brother HL-5250DN
Operating Systems Supported	Linux