Setting Up the Machine
11
3 Load paper in the paper tray
1 Pull the paper tray completely out of the printer.
2 While pressing the blue paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
Note
For Legal size paper, press in the paper-guide
release lever (1) and pull out the back of the paper
tray.
(Legal size paper is not available in some regions.)
3 Fan the stack of paper well to avoid paper jams
and misfeeds.
4 Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
5 Put the paper tray firmly back in the printer.
1
1
1
To Next Page
Loading...
