Brother HL-5270DN Quick Setup Guide

Installing the Printer Driver
25
Macintosh
®
Network
Macintosh
®
For Mac OS
®
9.1 to 9.2 users
Connecting the printer to your Macintosh
®
and
installing the driver
1 Turn off the printer power switch.
2 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3 Turn on the printer power switch.
4 Put the supplied CD-ROM into your CD-ROM
drive. Double-click the Mac OS 9 folder.
5 Double-click your language folder.
6 Double-click the Printer Driver Installer icon
to install the printer driver. Follow the
on-screen instructions.
7 From the Apple
®
menu, click Chooser.
8 Click the Brother Laser (IP) icon, and then
choose BRN_xxxxxx (where xxxxxx are the
last six digits of the Ethernet address). Click
Setup....
Network User's Guide Chapter 6.
9 Click OK.
Close the Chooser.
The setup is now complete.

Brother HL-5270DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Maximum internal memory	544 MB
Number of print cartridges	1
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv4, IPv6
Networking features	Ethernet 10/100Base-TX
Power consumption (active)	610 W
Display	LCD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	80 W
Power consumption (PowerSave)	9 W

Weight and Dimensions

Dimensions (WxDxH)	393 x 384 x 259 mm