Brother HL-5270DN Quick Setup Guide

For Network Users
28
Web browser
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
The User Name is ‘admin’ and the default
password is ‘access’. You can use a web browser
to change this password.
See Chapter 2 of the Network User's Guide.
Network default settings
To restore all network settings of the internal print
server to default, follow the steps below.
1 Press the + or - button to choose NETWORK.
Press Set.
NETWORK
2 Press the + or - button to choose
FACTORY RESET.
Press Set.
FACTORY RESET
3 Press Set again.
OK?
Print the Printer Settings
Page
The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page:
1 Press the + button to choose INFORMATION.
Press Set.
INFORMATION
2 Press Set again.
PRINT SETTINGS
3 Press Set again to print the Printer Settings
Page.

Brother HL-5270DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Maximum internal memory	544 MB
Number of print cartridges	1
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv4, IPv6
Networking features	Ethernet 10/100Base-TX
Power consumption (active)	610 W
Display	LCD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	80 W
Power consumption (PowerSave)	9 W

Weight and Dimensions

Dimensions (WxDxH)	393 x 384 x 259 mm