Brother HL-5280DW

2006/05/31
CHAPTER 5 PJL- 36
Variables Description Sample Value Range
FONTSOURCE Sets the font source to Internal
fonts or Permanent Soft Fonts
I or S (HL-1050/1070/1250/1270N/
1450/1470N/P2500/1650/1670N/
1850/1870N/5040/5050/5070N/
5140/5150D/5170DN/2070N/5240/
5250DN/5270DN/5280DW)
I, C1, C2, S (HL-3260N/2460/
7050)
I, C,S (HL-6050/6050D/6050DN/
8050N)
FONTNUMBER Sets the font number 0 to n (HL-
1050/1070/1250/1270N/
1450/1470N/P2500)
0 to 0x7FFFFFFF (HL-1650/
1670N/3260N/2460/7050/1850/
1870N/5040/5050/5070N/5140/
5150D/5170DN/6050/6050D/
6050DN/8050N/2070N/5240/5250
DN/5270DN/5280DW)
PITCH Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
0.44, 0.45,.......99.99
PTSIZE Height of the default font in units
of points. The point size can be
specified to a quarter of a point
4.00, 4.25, .......999.75