EasyManuals Logo

Brother HL-5350DN Technical Reference Guide

Brother HL-5350DN
517 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
CHAPTER 3 PCL5C - 14
5. ENHANCE OUTPUT
5.1. Set Render Algorithm
Command
ESC*t#J (27)(42)(116)#(74) <1Bh><2Ah><70h>#<4Ah>
# = 0 Scatter dither
= 1 Snap to primaries
= 2 Snap black to white, all other colors to black
= 3 * Scatter dither
= 4 Scatter dither
= 5 Monochrome device best dither
= 6 Monochrome scatter dither
= 7 Clustered dither
= 8 Monochrome clustered dither
= 9 User-defined dither
= 10 Monochrome user-defined dither
= 11 Scatter dither
= 12 Monochrome scatter dither
= 13 Scatter dither
= 14 Monochrome scatter dither
* Default value = 3
This command selects the halftone render algorithm.
# = 1: This does not use halftones. For 8 bits/pixel, for instance, any value over 128 is
transferred to 255, and any value under 127 is transferred to 0.
# = 2: This transfers black to white and other colors to black.
# = 3: This selects the scatter dither. The scatter dither is the most crisp dither (device best
dither) for the HL-2400C/Ce/3400CN/2600CN/3450CN/2700CN.
# = 0, 4, 11, 13: These show halftones using a dither method, which places dots in a dither pattern to
make the special frequency higher.
# = 7: This shows halftones using a dither method, which enlarges dots from their center.
# = 9: This shows halftones using the dither which is specified by the Download Dither Matrix
command.
# = 5, 6, 8, 10,
12, 14, 1025:
This replaces the color value with gray scale data using the formula below;
gray value = 0.30 x red + 0.59 x green + 0.11 x blue
5.2. Set Monochrome Mode
Command
ESC&b#M (27)(38)(98)#(77) <1Bh><26h><62h>#<4dh>
# = 0 * Monochrome mode off
= 1 Monochrome mode on
* Default value = 0
This command prints the color data by replacing it with gray scale data.
This command replaces the color data with gray scale data using the formula below;
gray value = 0.30 x red + 0.59 x green + 0.11 x blue
This command should be sent before sending the data to be printed. Failure to do so will cause the current
page to be closed and printed. This command may be sent on a page-by-page basis.

Table of Contents

Other manuals for Brother HL-5350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5350DN and is the answer not in the manual?

Brother HL-5350DN Specifications

General IconGeneral
ColorNo
N-up printing4, 9, 16, 25
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Internal memory32 MB
Processor modelNEC VR5500
Maximum internal memory544 MB
Sound power level (standby)35 dB
Sound pressure level (printing)54 dB
Total input capacity250 sheets
Total output capacity150 sheets
Multi-Purpose tray input capacity50 sheets
Maximum print size216 x 356 mm
Media weight (tray 1)60 - 105 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Supported network protocols (IPv4)IPv4: ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, WebServicesPrint, IPv6: NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, WebServicesPrint
Networking features10/100 Base-TX
Power consumption (active)675 W
Compatible operating systemsWindows: Vista, 2000 Prof., XP Home Edition, XP Prof. Edition (32 & 62 bits), Server 2003 (32 & 64 bits), Server 2008. MacIntosh: Mac OS X 10.3.9 + Linux
Power consumption (standby)75 W
Power consumption (PowerSave)6 W
Package weight11500 g
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)371 x 384 x 246 mm

Related product manuals