EasyManuals Logo

Brother HL-5350DN Technical Reference Guide

Brother HL-5350DN
517 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
CHAPTER 4 HP-GL/2 - 14
7.2. Plot Area and Unit Setting Instructions
Instruction Function
IP Scaling point
IR Input relative scaling points
SC Scale
IW Input window
RO Rotate coordinate system
IP - Input scaling point
IP [ P1
X, P1Y [,P2X, P2Y]] [;]
P1
X ; X coordinate of P1 P1Y ; Y coordinate of P1
P2
X ; X coordinate of P2 P2Y ; Y coordinate of P2
The coordinates used are absolute values in graphics units.
Set the location of the scaling points(P1,P2).
Coordinate values for P1X,P1Y, P2X and P2Y are given as integer numbers.
You can set P1 and P2 to be anywhere that the range of allowable coordinates permits. However, only
parts of resulting images that lie within the effective window will be printed.
The default location of P1 is the lower left corner and P2 is the upper right corner of the PCL picture frame.
Using this instruction without a parameter field initializes the scaling points(P1,P2) to the default location.
P2X and P2Y may be omitted. If P2X and P2Y are omitted, P2 is set automatically so as not to alter the
distance between P1 and P2.
If P2x and P2y are omitted P2 is set to be in the same position relative to P1 that it was before the command
was invoked.
The IP command remains in effect until another IP command, an IR command or an IN command is used.
IR - Input relative scaling points
IR [ P1x, P1y [, P2x, P2y]][;]
P1x ; x-coordinate of P1 P1y ; y-coordinate of P1
P2x ; x-coordinate of P2 P2y ; y-coordinate of P2
The coordinate values are percentages relative to the bottom left and top right hand corners of the picture
frame.
Coordinate values for P1x, P1y, P2x, and P2y are treated as clamped real numbers.
Using this instruction without parameters sets the scaling points (P1, P2) to their initial positions, the bottom
left and top right hand corners of the picture frame.
If P2x and P2y are omitted P2 is set to be in the same position relative to P1 that it was before the command
was invoked.
You can set P1 and P2 to be anywhere that the range of allowable coordinates permits. However, only
parts of resulting images that lie within the effective window will be printed.
The IR command remains in effect until another IR command, and IP command or an IN command is used.

Table of Contents

Other manuals for Brother HL-5350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5350DN and is the answer not in the manual?

Brother HL-5350DN Specifications

General IconGeneral
ColorNo
N-up printing4, 9, 16, 25
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Internal memory32 MB
Processor modelNEC VR5500
Maximum internal memory544 MB
Sound power level (standby)35 dB
Sound pressure level (printing)54 dB
Total input capacity250 sheets
Total output capacity150 sheets
Multi-Purpose tray input capacity50 sheets
Maximum print size216 x 356 mm
Media weight (tray 1)60 - 105 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Supported network protocols (IPv4)IPv4: ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, WebServicesPrint, IPv6: NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, WebServicesPrint
Networking features10/100 Base-TX
Power consumption (active)675 W
Compatible operating systemsWindows: Vista, 2000 Prof., XP Home Edition, XP Prof. Edition (32 & 62 bits), Server 2003 (32 & 64 bits), Server 2008. MacIntosh: Mac OS X 10.3.9 + Linux
Power consumption (standby)75 W
Power consumption (PowerSave)6 W
Package weight11500 g
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)371 x 384 x 246 mm

Related product manuals