Brother HL-5350DN Technical Reference Guide

CHAPTER 5 PJL - 58
7.2. Inquire Command
The INQUIRE command is used in order to get the information of the current value of a specified variable
in the PJL DEFAULT setting. (PJL environment). It is possible to get the information for variables the
value of which PJL cannot change (Read-only).
This INQUIRE command can request only one variable at a time. If you would like to get the information
from multiple variables, send multiple INQUIRE commands or the PJL INFO VARIABLES command
which responds with all the variables in the PJL Default settings (PJL Default Environment).
Syntax
@PJL INQUIRE [LPARM : personality] variable [<CR>]<LF>
Response Syntax
@PJL INQUIRE [LPARM : personality] variable <CR><LF>
value <CR><LF>
<FF>
If the variable is not supported by the printer, it returns the response in the following syntax :
@PJL INQUIRE [LPARM : personality] variable <CR><LF>
"?" <CR><LF>
<FF>
 LPARM : personality
This optional parameter must be used when requesting the information of printer language-specific variables,
such as the font number in the PJL DEFAULT setting.
 variable : variable
This is a parameter which specifies which variable you would like to get the information about among the
PJL Default settings (PJL Current Environment). The variables which can be used in this command are
listed in Appendix A. You can also check by sending the @PJL INFO VARIABLES command to the
printer.
 value
This is the value of the parameter requested by the variable parameter.
Examples
Example 1 :
This example requests the current print environment settings for RET, PAPER, and ORIENTATION :
<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT ***Requesting*** <CR><LF>
@PJL COMMENT about PJL Default Settings** <CR><LF>
@PJL ECHO 19:15:00 02-20-1993 <CR><LF>
@PJL INQUIRE RET <CR><LF>
@PJL INQUIRE PAPER <CR><LF>
@PJL INQUIRE ORIENTATION <CR><LF>
<ESC>%-12345X
The printer may return, for example, the following response against the above INQUIRE commands :
@PJL ECHO 19:15:00 02-20-1993 <CR><LF>
<FF>
@PJL INQUIRE RET<CR><LF>
LIGHT<CR><LF>
<FF>
@PJL INQUIRE PAPER<CR><LF>
LETTER<CR><LF>
<FF>
@PJL INQUIRE ORIENTATION<CR><LF>
PORTRAIT<CR><LF>
<FF>

Brother HL-5350DN Specifications

General

Color	No
N-up printing	4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	32 MB
Processor model	NEC VR5500
Maximum internal memory	544 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	216 x 356 mm
Media weight (tray 1)	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Supported network protocols (IPv4)	IPv4: ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, WebServicesPrint, IPv6: NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, WebServicesPrint
Networking features	10/100 Base-TX
Power consumption (active)	675 W
Compatible operating systems	Windows: Vista, 2000 Prof., XP Home Edition, XP Prof. Edition (32 & 62 bits), Server 2003 (32 & 64 bits), Server 2008. MacIntosh: Mac OS X 10.3.9 + Linux
Power consumption (standby)	75 W
Power consumption (PowerSave)	6 W
Package weight	11500 g

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 246 mm