Options
89
5
SO-DIMM (memory module) 5
For HL-5340D
The HL-5340D printer has 16 MB of standard memory and one slot for optional memory expansion. You can
expand the memory up to 528 MB by installing a dual in-line memory module (SO-DIMMs).
For HL-5350DN / HL-5370DW
The printers have 32 MB of standard memory and one slot for optional memory expansion. You can expand
the memory up to 544 MB by installing dual in-line memory modules (SO-DIMMs).
SO-DIMM types 5
In general, the machine uses industry-standard SO-DIMM with the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
For purchasing information and part numbers visit the Buffalo Technology website:
http://www.buffalo-technology.com/
• There might be some SO-DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or Brother Customer Service.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
