Brother HL 5370DW

Configuring your machine for a wireless network (For HL-5370DW)
22
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. (See page 24.)
b Confirm your wireless network setup method. (See page 25.)
c Configure your machine for a wireless network. (See page 28.)
Wireless configuration and installing printer driver have been completed.
o Infrastructure mode
Connected to a computer with an access point
or
o Ad-hoc mode See page 23.
Connected to a wireless capable computer
without an access point
Using the Brother
installer application
(Recommended)
Using the one-push
wireless setting mode
(if your wireless access
point supports either
SecureEasySetup™,
Wi-Fi Protected Setup
or AOSS™)
Using the PIN Method
of Wi-Fi Protected
Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
Temporarily using a
network cable
Using automatic
wireless (one-push)
method
Configuring your machine for a wireless network
(For Windows
®
)
See page 29.
(For Macintosh)
See page 61.
(For Windows
®
)
See page 40.
(For Macintosh)
See page 71.
See page 90. See page 100.
Installing the printer driver
(For Windows
®
) See page 58.
(For Macintosh) See page 88.
(For Windows
®
)
See page 93.
(For Macintosh)
See page 97.
(For Windows
®
)
See page 103.
(For Macintosh)
See page 107.