Brother HL 5370DW

Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
66
5
l The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
Note
•“SETUP” is the default SSID of the machine. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if
the machine and the access point are within range for wireless communication. Then, click Refresh.
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and then click Next.