Driver and Software
53
3
Toner Save
You can conserve toner use with this feature. When you set Toner Save mode to On, print appears
lighter. The default setting is Off.
• We do not recommend Toner Save for printing Photo or Greyscale images.
• Toner Save mode is not available for 1200 dpi or HQ 1200 resolution.
Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep
mode, the printer acts as though it were turned off. When you choose Printer Default the timeout
setting will be 1 minute.
While the printer is in sleep mode, Back light is off, the LCD shows SLEEP, but the printer can still
receive data. Receiving a print file or document or pressing Go will automatically wake up the printer
to start printing.
For more information about Sleep Time setting change, please visit the product page at
http://solutions.brother.com/
and see "Information".
Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is On.
High Quality Image Printing
You can get high quality image printing. If you set High Quality Image Printing to On, the printing
speed will be slower.
Reduce Paper Curl
If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do
not need to choose this setting. We recommend that you change the printer driver setting in Media
Type to a thin setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
