Brother HL-L2300d Series Web Connect Guide

Home > About Outline, Scan, and Copy or Cut > Outline, Scan, and Copy or Cut Parts of Your
Documents > Copy an Outlined Section
Copy an Outlined Section
Outline areas of your document with a red line and use Outline and Copy to display only those areas in your final
scanned document.
1. Using a thick red pen or marker, outline the areas of the document that you want to copy.
2. Load your document.
3. Press d or c to display the Apps option.
4. Press Apps.
• Occasionally, updates or announcements about Brother Web Connect's features will be displayed on
the LCD. Read the information, and then press OK.
• If information regarding the Internet connection is displayed on the machine’s LCD, read the information
and press OK. If you want to display this information again, press Yes.
5. Press a or b to display Outline&Copy.
6. Press Outline&Copy.
7. Press Copy outlined area.
8. If information regarding Copy outlined area is displayed, read the information and press OK. If you want
to display this information again, press Yes.
9. The Copy Settings screen will be displayed. Change your setting, if needed.
10. Press OK.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the printing job.
11. When the machine finished printing, press OK.
12. Press
.
Related Information
• Outline, Scan, and Copy or Cut Parts of Your Documents
38

Brother HL-L2300d Series Specifications

General

Functions	Print
Standard Paper Capacity (sheets)	250
Standard Interface(s)	USB 2.0
Print Resolution (maximum dpi)	2400 x 600 dpi
Recommended Monthly Print Volume	250 - 2, 000 pages
Operating System Compatibility	Windows, Mac, Linux