EasyManua.ls Logo

Brother HL-S7000DN - Lan Connection; Radio Interference

Brother HL-S7000DN
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Wiring information (U.K. only) 1
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same
rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover. If in any doubt, call
a qualified electrician.
Warning -This product must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
LAN connection 1
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
Radio interference 1
WARNING
This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
LED radiation 1
LEDs under the output stopper are certified as Exempt Group as defined in IEC62471:2006.

Other manuals for Brother HL-S7000DN

Related product manuals