Brother KE-484C User Manual (English)

Other manuals for Brother KE-484C

Instruction Manual68 pages

Service Manual198 pages

Parts List1 page

Questions and Answers:

A
Allison GrossSep 6, 2025
What causes poor seam finish on reverse side of Brother KE-484C Sewing Machine material?
- J
  Joseph HinesSep 6, 2025
  A poor seam finish on the reverse side of the material can be caused by: * The shuttle race thread guide not separating the threads sufficiently; adjust its position. * The upper thread not being properly tight; adjust the upper thread tension. * Uneven needle thread; adjust the sub-tension. * The needle thread being too long; adjust the thread take-up lever stroke.
D
Dwayne RossSep 8, 2025
What to do if the Brother KE-484C work clamp does not rise?
- B
  Brandy HollowaySep 8, 2025
  If the work clamp or button clamp does not rise, it could be due to: * Sluggish work clamp operation; grease the sliding part of the work clamp. * The work clamp (Button clamp) lift amount being too great; adjust the work clamp (button clamp) lift amount. * Too much friction between the work clamp plate and work clamp arm lever plate; grease them. * The work clamp contacting the thread wiper; adjust the position of the thread wiper.
M
Michele HarrisSep 10, 2025
What causes incorrect work clamp lift amount on Brother KE-484C Sewing Machine?
- B
  Brenda JonesSep 10, 2025
  An incorrect work clamp lift amount or button clamp lift amount can be caused by: * Incorrect position of the work clamp arm lever plate (button clamp holder hook assembly); adjust the work clamp (button clamp) lift amount. * Incorrect position of the work clamp arm lever; adjust the work clamp (button clamp) lift amount.
Z
zfisherSep 12, 2025
What to do if Brother KE-484C work clamp does not close?
- N
  Natalie Conrad MDSep 12, 2025
  If the work clamp does not close, check whether the stop lever is engaged with the stop position adjusting plate or not, and adjust the position of the presser closing roller.
M
matthew90Sep 13, 2025
What to do if Brother KE-484C work clamp is not lowered?
- S
  Stephen WilsonSep 13, 2025
  If the work clamp or button clamp is not lowered, check if the presser lifter link is not moving back and see if the link return spring is unhooked.