Brother MFC-230C - 10 Making Copies; How to Copy; Entering Copy Mode; Making a Single Copy

50
10
How to copy 10
Entering Copy mode 10
Press (Copy) to enter Copy mode. The
default setting is Fax. You can change the
number of seconds or minutes that the
machine stays in Copy mode. (Mode
Timer on page 18.)
The LCD shows the default copy setting:
1 Copy Ratio
2Quality
3 No of Copies
Making a single copy 10
a Make sure you are in Copy mode .
b Load your document.
c Press Black Start or Color Start.
Making multiple copies 10
You can make up to 99 copies.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Black Start or Color Start.
Stop copying 10
To stop copying, press Stop/Exit.
Making copies 10
123