Brother MFC-250C User Guide

Troubleshooting and Routine Maintenance
95
B
Not Registered
You tried to access a Speed Dial
number that is not programmed.
Set up the Speed Dial number. (See Storing
Speed Dial numbers on page 45.)
Out of Memory The machine's memory is full. When copy operation is in progress, press
Stop/Exit and wait until the other operations in
progress finish and then try again.
The memory card or USB Flash
memory drive you are using does
not have enough free space to scan
the documents.
Delete unused files from your memory card or
USB Flash memory drive to make some free
space and then try again.
Paper Jam Paper is jammed in the machine. Remove the jammed paper by following the
steps in Printer jam or paper jam on page 97.
Make sure the paper length guide is adjusted to
the correct paper side.
Print Unable XX The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and look on the left,
middle, and right hand side under the covers for
any foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power source for several
minutes then reconnect it.
Scan Unable XX The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and look on the left,
middle, and right hand side under the covers for
any foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power source for several
minutes then reconnect it.
Unusable Device A broken device has been
connected to the USB direct
interface.
Unplug the device from the USB direct interface,
then press On/Off to turn the machine off and
then on again.
Unusable Device
Please Disconnect
USB Device.
A USB device or USB Flash
memory drive that is not supported
has been connected to the USB
direct interface.
(For more information, visit us at
http://solutions.brother.com
.)
Unplug the device from the USB direct interface.
Wrong Paper Size Paper is not the correct size. Check that the machine’s Paper Size setting
matches the size of paper in the tray. (See Paper
Size on page 19.)
Error Message Cause Action

Brother MFC-250C Specifications

General

Print technology	Inkjet
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	27 ppm
Print speed (color, normal quality, A4/US Letter)	22 ppm
Scan to	e-mail, OCR, USB
Image formats supported	BMP, JPG, PNG
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	1200 x 2400 DPI
Copier resize	25 - 400 %
PC free copying	Yes
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	20 cpm
Copy speed (color, normal quality, A4)	18 cpm
Faxing	Color faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Fax speed dialing (max numbers)	40
Total input capacity	100 sheets
Total output capacity	50 sheets
Sound pressure level (printing)	50 dB
Scan speed	6 sec/page
Network ready	No
Dimensions (WxDxH)	390 x 365 x 150 mm
All-in-one functions	Copy, Fax, Scan
Standard media sizes	Com10, DL, C5, JE4
Color all-in-one functions	fax, print
Compatible operating systems	Windows Vista, XP (32 & 64 bit) Windows 2000, Linux; Mac OS X 10.2.4 en recenter
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (PowerSave)	3 W
Power consumption (average operating)	22 W
Number of print cartridges	4
Media weight (tray 1)	64 - 220 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Borderless printing media sizes	A4, A6
Maximum ISO A-series paper size	A4
Bundled software	Brother MFL-pro suite in Windows: BrotherControlCentre 3 Scansoft Paperport 11SE + OCR, Macintosh:BrotherControlCentre 2 Newsoft Presto! Page manager 7
Package weight	10100 g
Market positioning	Home & office