Brother MFC-295CN User Manual

Loading paper and documents
15
2
Handling and using print
media 2
 Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
 Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
 Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1 0.08 in. (2 mm) or greater curve may
cause jam to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a short grain
Paper capacity of the output paper
tray cover
2
Up to 50 sheets of Letter, Legal or A4 20 lb
(80 g/m
2
) paper.
 Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
1
1

Brother MFC-295CN Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	33 ppm
Print speed (color, normal quality, A4/US Letter)	27 ppm
Digital sender	No
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Image formats supported	BMP, PCX, PNG
Maximum scan resolution	19200 x 19200 DPI
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Mono faxing
Fax memory	200 pages
Modem speed	14.4 Kbit/s
Auto-redialing	Yes
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Total input capacity	100 sheets
Total output capacity	50 sheets
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4
Supported network protocols (IPv4)	ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD responder, Web Services
Power requirements	AC 100-120V 50/60Hz
Networking features	10/100 Base-TX
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, print, scan
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Sound pressure level (printing)	50 dB
Power consumption (standby)	6 W
Power consumption (average operating)	26 W
Market positioning	Home & office