Installing the Driver & Software
17
Windows
®
USB
Windows
®
10 Insert the USB cable into the USB port marked
with a symbol. You will find the USB port
next to the handset cord port as shown below.
11 Connect the USB cable to your computer.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
12 Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
13 When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
14 Click Finish to restart your computer.
(After restarting the computer, for Windows
®
2000 Professional/XP/XP Professional x64
Edition, you must be logged on with
Administrator rights.)
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ’s in
Start/All Programs (Programs)/Brother/
MFC-XXXX.
The MFL-Pro Suite has been installed and
the installation is now complete.
Note
• MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
ScanSoft
®
PaperPort
®
SE with OCR and True
Type
®
fonts.
PaperPort
®
SE with OCR is a document
management application for viewing scanned
documents.
• Windows
®
XP Professional x64 Edition does not
support the Brother ControlCenter3 Modern user
interface (see the Software User's Guide located
on the CD-ROM for details).
To Next Page
Loading...
Need help?
General
