Brother MFC-440CN

Setting Up the Machine
10
STEP1
8 Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1 Press Menu.
2 Press a or b to choose General Setup.
Press OK.
3 Press a or b to choose LCD Settings.
Press OK.
4 Press a or b to choose LCD Contrast.
Press OK.
5 Press a or b to choose Light, Med or Dark.
Press OK.
6 Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.
9 Setting the date and time
The machine displays the date and time, and if you
set up the station ID it will add it to each fax you send.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Date/Time.
Press OK.
4 Enter the last two digits of the year on the dial
pad, and then press OK.
Date/Time
Year:20
07
(e.g. Enter 0 7 for 2007.)
5 Enter the two digits for the month on the dial
pad, and then press OK.
Date/Time
Month:
01
(e.g. Enter 0 1 for January.)
6 Enter the two digits for the day on the dial pad,
and then press OK.
Date/Time
Day:
01
(e.g. Enter 0 1 for the first day of the month.)