Brother MFC-495CW Quick Setup Guide

29
For Wireless Network Users
Wireless Network
For wireless network interface users
17
Before you begin
First you must configure the wireless network settings of your machine to communicate with your network access
point/router. After the machine is configured to communicate with your access point/router, computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
drivers and software. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal everyday document printing, place the Brother machine as close to the
network access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you
may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput speed.
Although the Brother MFC-495CW can be used in both a wired and wireless network, only one of the connection
methods can be used at a time.
The following instructions are for infrastructure mode (connected to a computer through an access point/router).
Infrastructure Mode
a Access point/router
b Wireless Network machine (your machine)
c Wireless capable computer connected to the access point/router
d Wired computer connected to the access point/router
Please make sure the wireless network settings of the machine match the access point/router.
IMPORTANT
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose Network and press OK.
Press a or b to choose Network Reset, and then press OK.
Press 1 twice for Yes to accept the change.
Note
To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access
point/router) you can find instructions in the Network User’s Guide on the CD-ROM.
You can view the Network User’s Guide by following the instructions below.
1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.
For Windows
®
:
2 Choose your model and the language. The CD-ROM top menu will appear.
3Click Documentation, and then click HTML documents.
For Macintosh:
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.
1
2
3
4

Brother MFC-495CW Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	35 ppm
Print speed (color, normal quality, A4/US Letter)	28 ppm
Digital sender	No
Number of print cartridges	4
Total input capacity	100 sheets
Total output capacity	50 sheets
Mac compatibility	Yes
Dimensions (WxDxH)	391 x 376 x 180 mm
Wireless technology	802.11b/g
All-in-one functions	Copy, Fax, Scan
Package weight (imperial)	22.9 lbs
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Windows/Mac OS
Package dimensions (W x D x H)	18.3 x 10 x 18.1 \
Display	TFT
Display diagonal	3.3 \
Market positioning	Home & office
Supported network protocols (IPv4)	ARP, RARP, BOOTP, APIPA, NetBIOS/WINS, LPR/LPD, Raw Port/Port9100, DNS, mDNS, FTP, SNMPv1, TFTP, LLTD
Faxing	Color faxing
Fax memory	480 pages
Fax speed dialing (max numbers)	33600 b/s
Copier resize	25 - 400 %
Copy speed (black, normal quality, A4)	23 cpm
Copy speed (color, normal quality, A4)	20 cpm
Image formats supported	BMP, PCX, PNG
Sustainability certificates	ENERGY STAR
Paper tray media types	Plain paper
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Power consumption (average operating)	- W