7
Setting Up
the Machine
Windows
®
Mac OS
®
XMac OS
®
8.6 - 9.2
Windows
®
Network
For
Network Users
Macintosh
®
Network
Warning
If ink gets in your eyes wash them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
2
Lift the scanner cover from right-hand side
of the MFC until it locks securely into the
open position.
3
Remove the protective parts.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering machine,
connect it as shown below.
Please set the Receive Mode to “External
TAD” if you have an external answering
machine. For more details, see
“Connecting an external device to your
MFC” in the Appendix of the User’s Guide.
TAD
TAD
4
Installing the Ink
Cartridges
No Cartridge
Open scanner
Do not throw away the protective parts.
You will need them when you transport the
machine.
Scanner Cover
Continued...
To Next Page
Loading...
Need help?
General
