Remote fax options
61
9
Retrieving fax messages 9
a Dial your fax number.
b When your machine answers, enter
your remote access code (3 digits
followed by l). If you hear one long
beep, you have messages.
c When you hear two short beeps,
press 9, 6, 2.
d Wait for the long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages forwarded followed
by # # (up to 20 digits).
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Press 9, 0 to reset the machine when
you have finished.
f Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number 9
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a Dial your fax number.
b When your machine answers, enter
your remote access code (3 digits
followed by l) during a period of
silence. If you hear one long beep, you
have messages.
c When you hear two short beeps,
press 9, 5, 4.
d Wait for the long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
by # # (up to 20 digits).
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Press 9, 0 when you have finished.
f Hang up after you hear your machine
beep.
To Next Page
Loading...
