Brother MFC-5895CW Quick Setup Guide

2
2
Load plain A4 paper
a Pull the paper tray completely out of the
machine.
b Open the paper tray cover.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
e Check that the paper is flat in the tray.
f Gently adjust the paper side guides to the
paper with both hands.
g Close the paper tray cover. Check that the
paper is flat in the tray and below the maximum
paper mark a.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
3
2
1
3
IMPORTANT
Do not push the paper in too far.
1

Brother MFC-5895CW Specifications

General

Scan speed	4.83 sec/page
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Scan to	e-Mail, File, Image, OCR
PC free copying	Yes
Total number of input trays	1
Processor family	RISC
Non-ISO print media sizes	Letter
JIS B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	60 - 90 g/m²
Security algorithms	128-bit WEP, 64-bit WEP, SSID, WPA-PSK, WPA2-PSK
Package weight	15700 g
Faxing	Color faxing
Power consumption (PowerSave)	0.8 W
Digital sender	No
Market positioning	Home & office