Brother MFC-5895CW Quick Setup Guide

4
f Take care to match the colour of the lever with
the cartridge colour.
g Install each ink cartridge in the direction of the
arrow on the label.
h Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
5
Check the print quality
a
.
Press Colour Start.
b Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
d The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on
the dial pad.
e Press 1 (Yes), the machine will then start
cleaning the colours.
f After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
6
Choose your language
You can select the display language of your LCD
messages.
a Press Menu.
b Press a or b to select Initial Setup.
Press OK.
c Press a or b to select Local Language.
Press OK.
d Press a or b to select your language.
Press OK.
e Press Stop/Exit.
Set Paper and Press
Start

Brother MFC-5895CW Specifications

General

Scan speed	4.83 sec/page
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Scan to	e-Mail, File, Image, OCR
PC free copying	Yes
Total number of input trays	1
Processor family	RISC
Non-ISO print media sizes	Letter
JIS B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	60 - 90 g/m²
Security algorithms	128-bit WEP, 64-bit WEP, SSID, WPA-PSK, WPA2-PSK
Package weight	15700 g
Faxing	Color faxing
Power consumption (PowerSave)	0.8 W
Digital sender	No
Market positioning	Home & office