Brother MFC-665CW - Setting up the Message Center; Sending in the Product Registration and Test Sheet (USA Only)

Setting Up the Machine
14
STEP1
14 Setting up the Message
Center
You must record an outgoing message in order to use
the Message Center mode.
1 Record the Message Center outgoing
message (Msg Ctr OGM).
See Outgoing Message (OGM) in Chapter 9
of the User’s Guide.
2 Activate Message Center mode.
Press . The button will light when the mode
is active.
If the Message Center Mode is on, it
overrides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can receive
a fax automatically.
For details, see Message Center
(MFC-665CW and MFC-845CW only) in
Chapter 9 of the User’s Guide.
15 Sending in the Product
Registration and Test Sheet
(USA only)
1 Fill out the Product Registration and Test
Sheet.
2 Put the sheet face down in the ADF (Automatic
Document Feeder) or the scanner glass.
3 Make sure (Fax) is illuminated in
Green.
4 Enter the toll-free fax number: 1-877-268-9575.
5 Press Black Start.