Brother MFC-7320 - STEP 1 Setting up the Machine; Installing the Drum Unit and Toner Cartridge Assembly

Setting Up the Machine
4
STEP 1
1
1 Installing the drum unit and
toner cartridge assembly
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done when
installing the driver.
1 Open the front cover.
2 Unpack the drum unit and toner cartridge
assembly.
3 Gently shake it from side to side several times
to distribute the toner evenly inside the
assembly.
4 Put the drum unit and toner cartridge assembly
into the machine.
5 Close the front cover of the machine.