To Next Page
M
millerchristopherSep 6, 2025
What does 'Size Error DX 1' mean on my Brother Printer?
- YyvonnemcmillanSep 6, 2025
If your Brother printer displays 'SIZE ERROR DX 1', choose a paper size supported by the duplex tray.
What does 'Size Error DX 1' mean on my Brother Printer?
If your Brother printer displays 'SIZE ERROR DX 1', choose a paper size supported by the duplex tray.
How to resolve 'Cartridge Error' on Brother Printer?
If you are getting a 'CARTRIDGE ERROR' on your Brother printer, make sure that the drum unit and toner cartridge assembly is installed properly.
What to do if my Brother Printer says 'No Toner'?
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
What does 'Disconnected' mean on my Brother All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Disconnected', it means the other person or other person’s fax machine stopped the call. Try to send or receive again.
What to do if my Brother All in One Printer displays 'BT Call Sign On (U.K. only)'?
If your Brother All in One Printer displays 'BT Call Sign On (U.K. only)', it means BT Call Sign is set to On, preventing you from changing the Receive Mode from Manual. Set BT Call Sign to Off to resolve this.
What to do if my Brother MFC-7362N All in One Printer displays 'Cooling Down Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', it means the temperature of the drum unit or toner cartridge is too high, and the machine has paused its current print job to cool down. Make sure that you can hear the fan in the machine spinning and that the exhaust outlet is not blocked by something. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning disconnect the machine from the power for several minutes, then reconnect it.
What to do if my Brother Printer says 'Front Cover Open'?
If your Brother printer displays 'FRONT COVER OPEN', close the front cover of the machine.
Why won't my Brother Printer feed paper?
If your Brother machine is not feeding paper, ensure the paper in the tray is straight and not curled. Straighten the paper if necessary, or try removing the paper, turning the stack over, and putting it back in the tray. If curling persists, replace the paper. Reduce the amount of paper in the tray and ensure manual feed mode is not selected in the printer driver. Clean the paper pick-up roller.
What does 'Size mismatch' mean on my Brother All in One Printer and how to fix it?
If your Brother All in One Printer displays 'Size mismatch', it means the paper in the tray is not the correct size. Load an appropriate size of paper in the tray and reset the “Paper Size”.
What does 'Replace Toner' mean on my Brother All in One Printer and how to fix it?
The 'Replace Toner' message on your Brother All in One Printer means the machine will stop printing until you replace the toner cartridge. If the Toner setting is set to Stop, replace the toner cartridge with a new, original Brother toner cartridge to reset the Replace Toner mode. If the Toner setting is set to Continue, the machine will continue printing until the LCD shows Toner Ended.
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Print Resolution | 2400 x 600 dpi |
| Scan Resolution | 600 x 1200 dpi |
| Optical Scan Resolution | 600 x 1200 dpi |
| Network Connectivity | Ethernet |
| USB Connectivity | USB 2.0 |
| Paper Capacity | 250 sheets |
| Standard Paper Capacity | 250 sheets |
| Duplex Printing | Manual |
| ADF Capacity | 35 sheets |
| Scanner Type | Flatbed |
| Standard Memory | 32 MB |
| Copy Resolution | 600 x 600 dpi |
| Type | All-in-One |
| Connectivity | USB, Ethernet |
| Display | LCD |
