How to fix vertical black lines when sending faxes from my Brother MFC-7340 All in One Printer?
Black vertical lines on faxes you send are typically caused by dirt or correction fluid on the glass strip. To resolve this, clean the scanner glass.
What to do if my Brother All in One Printer has no printout?
If your Brother All in One Printer isn't printing, there are several things you can check: * Ensure the printer is plugged in and the power switch is turned on. * Verify that the toner cartridge and drum unit are installed correctly. * Check the interface cable connection. * Make sure the correct printer driver has been installed and chosen. * Check to see if the LCD is showing an error message. * Check the machine is online.
Why Brother MFC-7340 does not load paper and shows 'No Paper' or 'Paper Jam'?
If your Brother All in One Printer displays 'No Paper' or a 'Paper Jam' message, here's what you can do: * If there is no paper, load a new stack of paper into the paper tray. * If there is paper in the paper tray, make sure it is straight. * If the paper is curled, you should straighten it; sometimes it is helpful to remove the paper, turn the stack over, and put it back into the paper tray. * Reduce the amount of paper in the paper tray, and then try again.
How to remove vertical black line in copies from Brother All in One Printer?
Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip. Clean the scanner glass. The corona wire for printing may also be dirty, so clean the corona wire as well.
How to fix vertical black lines when receiving faxes on my Brother MFC-7340?
If you're seeing vertical black lines when receiving faxes, the corona wire for printing may be dirty, so clean the corona wire. The sender’s scanner may also be dirty, ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine.
What to do if my computer cannot find my Brother MFC-7340?
For Windows® users: The firewall setting on your PC may be rejecting the necessary network connection. For Macintosh® users: Re-select your machine in the Device Selector application.
What to do if I cannot install software or print with my Brother All in One Printer?
Run the Repair MFL-Pro Suite program on the CD-ROM.
How to fix 'Toner Low' on Brother MFC-7340?
If your Brother All in One Printer displays 'Toner Low', prepare a new toner cartridge. If the toner is empty, replace it.
How to clear paper jam in the rear of Brother MFC-7340?
To resolve a 'Paper jam in the rear of the machine' error on your Brother All in One Printer, open the back cover and remove the jammed paper.
How to troubleshoot poor sending quality on Brother MFC-7340?
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Grayscale levels | 256 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 16 MB |
| Card reader integrated | - |
| Sound pressure level (printing) | 53 dB |
| Dimensions (WxDxH) | 428 x 396 x 304 mm |
| All-in-one functions | Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows Mac OS |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Copy speed (black, normal quality, A4) | 21 cpm |
| Power consumption (PowerSave) | 10 W |
| Power consumption (average operating) | 460 W |
| Maximum duty cycle | 10000 pages per month |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5 |
| Maximum ISO A-series paper size | A4 |
| Market positioning | Home & office |
To Next Page
