Brother MFC-7365DN - Deleting Group Numbers

Chapter 5
40
g If you want to change the fax resolution
for the Group, press a or b to choose the
resolution you want.
Press OK. For details, follow the
directions beginning with step h in
Options for Setting Up Groups. (See
Options for Setting Up Groups
on page 36).
h Press Stop/Exit.
Deleting Group numbers 5
If you try to delete a Group number, the LCD
will show the stored Group name or number.
a Press Menu, 2, 3, 3.
Address Book
3.Setup Groups
b Choose the One Touch key or Speed
Dial number where the Group is stored.
Do one of the following:
 Press the One Touch key.
 Press (Address Book) and then
enter the three-digit Speed Dial
number.
Press OK.
Note
If the One Touch or Speed Dial number
you are trying to delete has been set to a
fax forwarding number, the LCD will ask
you if you want to change the name or
number.
c To delete the Group, press 2.
G01:*001*002#001
1.Change 2.Clear
d Do one of the following:
 To delete the Group, press 1.
 To exit without deleting the Group,
press 2.
Erase This Data?
1.Yes 2.No
e Press Stop/Exit.