Brother MFC-7840N - Section III Copy

Appendix B
75
B
Function table and default factory settings B
The factory settings are shown in Bold with an asterisk.
Main
menu
Submenu Menu selections Options Page
5.LAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
18
2.IP Address [000-255].[000-255].[000-255].
[000-255]
[000].[000].[000].[000]*
1
19
3.Subnet Mask [000-255].[000-255].[000-255].
[000-255]
[000].[000].[000].[000]*
1
20
4.Gateway [000-255].[000-255].[000-255].
[000-255]
[000].[000].[000].[000]*
20
5.Node Name BRNxxxxxxxxxxxx
(up to 15 characters)
21
6.WINS Config Auto*
Static
21
7.WINS Server Primary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
22
Secondary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server Primary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
23
Secondary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA On*
Off
24