EasyManua.ls Logo

Brother MFC-7860DW

Brother MFC-7860DW
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
IMPORTANT
To prevent damage to the machine from
static electricity, DO NOT touch the
electrodes shown in the illustration.
Handle the toner cartridge carefully. If
toner scatters on your hands or clothes,
immediately wipe or wash it off with cold
water.
We recommend that you place the drum
unit and/or the toner cartridge on a clean,
flat surface with a sheet of disposable
paper or cloth underneath it in case you
accidentally spill or scatter toner.
To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations.
Note
Be sure to seal up the used drum unit
tightly in a bag so that toner powder does
not spill out of the unit.
Discard used consumable according to
local regulations, keeping it separate from
domestic waste. If you have questions,
call your local waste disposal office. Be
sure to reseal the consumable items
tightly so that the material inside does not
spill.
e Unpack the new drum unit.
IMPORTANT
To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations.
Unpack the drum unit just before you put it
in the machine. Exposure to direct sunlight
or room light may damage the drum unit.

Table of Contents

Other manuals for Brother MFC-7860DW

Related product manuals