Brother MFC-8420 - Page 42

39
Installing the Driver & Software
E
When the Brother Software License
Agreement window appears, click Yes.
F
Select Network Interface, and then click
Next.
G
Select Standard, and then click Next.
The application files will be copied to your
computer.
H
Select Search the network for devices
and choose from a list of discovered
devices, and then click Next.
I
If the MFC is un-configured for your network:
Select the un-configured device or APIPA
from the list and then click Next.
➝
Go to
J
If the MFC is configured for your network:
Select the MFC from the list and then click
Next.
➝
Go to
M
J
Click Configure IP Address.
K
Enter the proper IP Address information for
your network, and then click OK.
(e.g. Enter 192.168.0.105 for IP Address)
For Network Interface Cable Users
(For Windows
®
95/98/98SE/Me/NT/2000 Professional/XP)
If you want to install the PS driver, select
Custom and then follow the on-screen
instructions. When the Select Components
screen appears, check PS Printer Driver,
and then continue following the on-screen
instructions.
If you see the following screen, click OK.
Step 2