Brother MFC-8420 - (For Windows 95;98;98 Se;Me;Nt;2000 Professional;Xp); For USB Interface Cable Users; For Mac os 8.6 to 9.2

41
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 8.
1
Switch off and unplug the MFC from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the Start Here icon to install
the printer, scanner and PC-FAX Send
drivers. If the language screen appears
select your language.
5
Click Install next to the MFL-Pro Suite for
your country.
6
Select USB Interface, and then click
Install.
7
After the installation is completed, restart
your Macintosh
®
.
8
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the MFC.
Do not connect the MFC to a USB
port on a keyboard or a non powered
USB hub.
9
Turn on the MFC by plugging in the power
cord. Turn the power switch on.
0
From the Apple
®
menu, open the Chooser.
For USB Interface Cable Users
For Mac OS
®
8.6 to 9.2
Step 2