5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Open the machine's back cover (the face up output tray).
8. Open the paper stopper.
9. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
10. Close the paper stopper.
11. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
• Load and Print Using the Paper Tray
26
To Next Page
Loading...
Need help?
General
