9
Connecting the machine safely 1
There are high-voltage electrodes inside the machine. Before you access the inside of the
machine, including for routine maintenance such as cleaning, make sure you have unplugged
the power cord from the electrical socket as well as any telephone (RJ-11) (MFC models only)
or Ethernet (Network models only) cables from the machine.
(This illustration is an example for Australia.)
DO NOT handle the plug with wet hands. Doing so may cause an electrical shock.
(This illustration is an example for Australia.)
Always make sure the plug is fully inserted.
This machine should be connected to an adjacent grounded AC power source within the range
indicated on the rating label. DO NOT connect it to a DC power source or inverter. Doing so may
cause an electrical shock. If you are not sure what kind of power source you have, contact a
qualified electrician.
To Next Page
Loading...
