(MFC-J3940DW)
When you load paper in Tray #2, replace the tray top cover.
10. Slowly push the paper tray completely into the machine.
IMPORTANT
DO NOT push the paper tray into the machine forcefully or quickly. Doing this may cause paper jams or
paper feed problems.
11. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
12. Change the paper size setting in the machine's menu, if needed.
CAUTION
Position the machine so the tray will not protrude past the edge of the table or desk where someone may
bump into it. The machine could fall and cause injury.
38
To Next Page
Loading...
